Assessment Test


Warning: mysql_connect(): Access denied for user 'lorque_wrdp1'@'localhost' (using password: YES) in /home/tmc2018/lorquelorqueassociates.com/wp-content/plugins/review_on_board/inc/class_lib.php on line 15
NEXT

1. Where are self-closing doors required on a MODU?

 
 
 
 

2. The Upper Explosive Limit (UEL) of a mixture of flammable vapors and air, is defined as __________.

 
 
 
 

3. Fuel oil tank vents are fitted with corrosion resistant screens to prevent __________.

 
 
 
 

4. A fire is considered “under control” when __________.

 
 
 
 

5. A device for preventing sparks or flames from entering a tank, while permitting the free passage of gases is called a __________.

 
 
 
 

6. For a MODU not on an international voyage, an approved substitute for an impulse projected rocket type line throwing appliance is a __________.

 
 
 
 

7. Each fireman's outfit and its spare equipment on a MODU must be stowed __________.

 
 
 
 

8. Why are flame screens on tank vents an important safety device?

 
 
 
 

9. By definition, spontaneous combustion is a result of __________.

 
 
 
 

10. On a MODU, a cabinet or space containing the controls or valves for the fixed firefighting system must be __________.

 
 
 
 

11. Flame screens must be maintained in good condition and fitted in the opening they protect in order to __________.

 
 
 
 

12. In accordance with Pollution Prevention Regulations (33 CFR), it is a requirement that cargo discharge piping must be tested every __________.

 
 
 
 

13. Pollution Prevention Regulations (33 CFR) provides, no person may use a connection for oil transfer operation unless it is a bolted or full threaded connection or __________.

 
 
 
 

14. Which of the following statement is correct concerning oil transfer, related equipment, test and inspection?

 
 
 
 

15. A coastwise service vessel over 100 gross tons has to de-ballast its fuel tanks to a facility while in port, therefore, this vessel must have a/an__________.

 
 
 
 

16. A 4000 gross tons ocean going vessel must be fitted with a standard discharge shore connection for the discharge of oily waste to a reception facility, the dimensions for the connection is specified in the __________.

 
 
 
 

17. Waste oil or used oil coming from sump tanks of machinery may not be __________.

 
 
 
 

18. According to Pollution Prevention Regulations (33 CFR), ship’s oily bilge slop may be pumped out in port only if the __________.

 
 
 
 

19. Open tank hatches from tanks which are not gas free and un-attended according to CFR’s, must be __________.

 
 
 
 

20. The flame screen used on ullage openings prevent the flames from entering a tank by __________.

 
 
 
 

21. A 6000 gross tons or above ocean going vessel must be fitted with a standard discharge shore connection with a dimensions outlined in Pollution Prevention Regulations (33 CFR) or be substituted with a __________.

 
 
 
 

22. According to Pollution Prevention Regulations (33 CFR), the minimum number of bolts permitted in an ANSI standard flange on an oil hose is __________.

 
 
 
 

23. Under Pollution Prevention Regulations (33 CFR Part 155), it state that no person may transfer oil or fuel to a vessel of 300 gross tons or more, constructed after June 30, 1974, unless each fuel tank vent, overflow, and filling pipe is equipped with a/an __________.

 
 
 
 

24. According to the Pollution Prevention Regulations (33 CFR), no person may transfer oil to or from a vessel unless __________.

 
 
 
 

25. Ship’s tank used for oily waste on a new ocean going cargo ship of 6000 gross tons must meet certain requirements for isolation between oil and bilge systems and this requirements are set forth in __________.

 
 
 
 

26. The size of bolt circle diameter required for shore connection to transfer oily ballast to a shore side reception facility as provided by 33 CFR’s for an ocean going ship of over 400 gross tons that are fitted with a standard discharge shore connection is __________.

 
 
 
 

27. Each pressure gage used in fuel transfer operation must be calibrated to indicate pressure, according to Coast Guard Regulations (33 CFR), within how many per cent of the actual pressure?

 
 
 
 

28. During topping off of bunker tanks, the rate of loading must be personally supervised by the __________.

 
 
 
 

29. When may a person serve as the person-in-charge of both a vessel and a facility during oil transfer operation according to Pollution Prevention Regulations (33 CFR)?

 
 
 
 

30. As specified under Pollution Prevention Regulations (33 CFR), the person-in-charge of bunkering is responsible for the __________.

 
 
 
 

31. Pollution Prevention Regulations (33 CFR) provides, no person may transfer oil to or from a vessel unless each person-in-charge has signed the ___________.

 
 
 
 

32. According to Coast Guard Pollution Prevention Regulations (33 CFR), each hose assembly used for transferring oil must have a __________.

 
 
 
 

33. Who makes the final decision of when oil transfer begin according to the Pollution Prevention Regulations (33 CFR)?

 
 
 
 

34. According to the Pollution Prevention Regulations (33 CFR), the declaration of inspection is the __________.

 
 
 
 

35. Which of the following conditions would disqualify a non-metallic hose as being suitable for use in transferring oil according to the Pollution Prevention Regulations (33 CFR)?

 
 
 
 

36. Pollution Prevention Regulation (33 CFR Part 156) specifies __________.

 
 
 
 

37. Every cargo ships and every passenger ships regardless of size having a length of 24 meters and upwards shall be inclined upon its completion and the ___________.

 
 
 
 

38. Every ship shall have scales of draught marked clearly at the __________.

 
 
 
 

39. At periodic interval not exceeding five years, lightweight survey shall be carried out on all passenger ships to verify any changes in lightship displacement and __________.

 
 
 
 

40. No doors, manholes, access opening, ventilation ducts or any other opening shall be fitted in the collision bulkhead below the __________.

 
 
 
 

41. All external opening leading to compartment assumed intact in the damage analysis which are below the final damage waterline are required to be __________.

 
 
 
 

42. Watertight decks, trunks, tunnels, duct keels and ventilators shall be of the same strength as __________.

 
 
 
 

43. The International Code for Fire Safety Systems (FSS) was adopted by the Maritime Safety Committee in order to provide international standards for the fire safety system and equipment required by __________.

 
 
 
 

44. The International Code for Fire Safety Systems made mandatory under 1974 SOLAS Convention and entered into force on __________.

 
 
 
 

45. The standard dimensions of flange outside diameter for international shore connections as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

46. The standard dimensions of flange inside diameter for international shore connections as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

47. The standard dimensions of flange bolt circle diameter for international shore connections as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

48. The standard dimensions of flange thickness for international shore connections as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

49. The standard dimensions of slots in flange for international shore connections as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

50. The standard bolts and nuts of flange for international shore connection as required by Chapter II-2 of 1974 SOLAS Convention is __________.

 
 
 
 

51. An outfit that consist of a set of personal equipment and a breathing apparatus is called __________.

 
 
 
 

52. Which of the following is excluded as set of personal equipment for fire fighter’s outfit?

 
 
 
 

53. Breathing apparatus is self-contained compressed air-operated breathing apparatus and the volume of air contained in the cylinder is at least 1, 200 liters capable of functioning for __________.

 
 
 
 

54. Breathing apparatus is provided with a fireproof life line with a length of at least __________.

 
 
 
 

55. Emergency Escape Breathing Devices (EEBDs) is only used for a hazardous atmosphere and shall not be used for __________.

 
 
 
 

56. The face covering of EEBD that is designed to form a complete seal around the eyes, nose, and mouth which is secured in position by suitable means is called __________.

 
 
 
 

57. The head covering of EEBD which completely covers the head, neck and may cover portion of the shoulders is called __________.

 
 
 
 

58. Any atmosphere that is immediately dangerous to health or life where EEBD is necessary to be used is known as __________.

 
 
 
 

59. The EEBD shall have a service duration of at least __________.

 
 
 
 

60. Each powder or carbon dioxide fire extinguishers shall have a capacity of __________.

 
 
 
 

61. Foam fire extinguishers shall have a capacity of __________.

 
 
 
 

62. The mass of all portable fire extinguishers shall not exceed __________.

 
 
 
 

63. All portable fire extinguishers shall have a fire-extinguishing capability of __________.

 
 
 
 

64. A portable foam applicator unit shall consist of a foam nozzle of an inductor type capable of being connected to the fire main by a fire hose, together with a portable tank containing __________.

 
 
 
 

65. The piping of fixed gas fire extinguishing systems shall not pass through __________.

 
 
 
 

66. The pre-discharge of fixed gas fire extinguishing medium has an audible alarm that operate for a length period of time needed to evacuate the space, but in no case __________.

 
 
 
 

67. For cargo spaces the quantity of carbon dioxide available shall be sufficient to give a minimum volume of free gas equal to __________.

 
 
 
 

68. For machinery spaces the quantity of carbon dioxide carried shall be sufficient to give a minimum volume of free gas equal to the largest volume of __________.

 
 
 
 

69. The volume of free carbon dioxide is calculated at __________.

 
 
 
 

70. For machinery spaces, the carbon dioxide fixed piping system can discharged 85 % of the gas into the space within __________.

 
 
 
 

71. Within two minutes, carbon dioxide fixed piping system can discharged __________.

 
 
 
 

72. In compliance with the International Code for fire safety systems, carbon dioxide system shall be provided with __________.

 
 
 
 

73. The boiler available for supplying steam systems as extinguishing medium shall have an evaporation of at least __________.

 
 
 
 

74. Fixed high-expansion foam system in machinery spaces shall be capable of rapidly discharging through fixed discharge outlet a quantity of foam sufficient to fill the greatest space to be protected at a rate of __________.

 
 
 
 

75. The expansion ratio of the foam on fixed foam fire-extinguishing system shall __________.

 
 
 
 

76. The expansion ratio of the foam on fixed low-expansion foam fire extinguishing systems shall __________.

 
 
 
 

77. Fixed low-expansion foam fire-extinguishing systems is capable of discharging through fixed discharge outlet in __________.

 
 
 
 

78. In fixed pressure water-spraying and water-mist fire-extinguishing systems effective average distribution of water is __________.

 
 
 

79. In accommodation and service spaces, the sprinklers shall come into operation within the temperature __________.

 
 
 
 

80. In location such as drying rooms, where high ambient temperatures might be expected the operating temperature of the sprinkler may be increased above the maximum deck head temperature by __________.

 
 
 
 

81. If the number of heads of sprinkler is less than 300, the quantity of spare sprinkler heads provided for all types and ratings installed on the ship is __________.

 
 
 
 

82. If the number of heads of sprinkler is 300 to 1000, the quantity of spare sprinkler heads provided for all types and ratings installed on the ship is __________.

 
 
 
 

83. If the number of heads of sprinkler is more than 1000, the quantity of spare sprinkler heads provided for all types and ratings installed on the ship is __________.

 
 
 

84. The number of spare sprinkler heads of any type need not exceed the __________.

 
 
 
 

85. Each section of the sprinkler shall be capable of being isolated by __________.

 
 
 
 

86. The sprinklers are placed in an overhead position and spaced in a suitable pattern to maintain an average application rate of not less than __________.

 
 
 
 

87. Fixed fire detection and fire alarm systems with a zone address identification capability are arranged on the following manner, except __________.

 
 
 
 

88. Detectors required in stairways, corridors, and escape route within accommodation spaces and operate before smoke density exceeds 12.5 % obscuration per meter is called __________.

 
 
 
 

89. Smoke detector installed in stairways, corridors and escape route within accommodation spaces operates before the smoke density __________.

 
 
 
 

90. Heat detectors operates before the temperature exceeds __________.

 
 
 
 

91. The maximum floor area covered by one heat detector is __________.

 
 
 
 

92. The maximum distance apart between center of heat detectors is __________.

 
 
 
 

93. The maximum distance away from bulkheads of heat detectors is __________.

 
 
 
 

94. The maximum floor area covered by one smoke detector is __________.

 
 
 
 

95. The maximum distance apart between center of smoke detectors is __________.

 
 
 
 

96. The maximum distance away from bulkheads of smoke detectors is __________.

 
 
 
 

97. The occurrence of a fault condition of heat and smoke detectors shall initiate a visual and audible fault signal at the control panel which shall be __________.

 
 
 
 

98. In every enclosed space for which smoke detection is required, it is installed with at least __________.

 
 
 
 

99. In firefighting, the term 'protecting exposures' means __________.

 
 
 
 

100. Which of the devices listed below is designed to prevent flames from entering through fuel tank vents?

 
 
 
 


Total Rating:


click here to go to review now