Assessment Test


Warning: mysql_connect(): Access denied for user 'lorque_wrdp1'@'localhost' (using password: YES) in /home/tmc2018/lorquelorqueassociates.com/wp-content/plugins/review_on_board/inc/class_lib.php on line 15
NEXT

1. Prior to entering the navigable waters of the United States after an international voyage, your vessel must conduct drills according to 33 CFR regulations for ports and waterways safety that test steering system functionality and log that in the vessel logbook, unless the drill is conducted and logged on a regular basis at least once every three months. Which of the following functions must be tested for?

 
 
 
 

2. Prior to getting underway on the navigable waters of the United States, within 12 hours, according to 33 CFR regulations governing ports and waterways safety, certain tests are required. Which of the following are included in the tests that must be performed? 1) Operation of the main propulsion machinery, ahead and astern. 2) Operation of the low lube oil pressure trip on the main engine. 3) Operation of the reverse power relay on the emergency generator. 4) Operation of the over speed trip on the ship's service diesel generator. 5) Operation of the emergency generator.

 
 
 
 

3. In accordance with international MARPOL Annex I regulations and federal regulations under 33CFR Subchapter O, for oceangoing ships of 400 gross tons and above but less than 10,000 gross tons, what is the required means for preventing pollution by oil as it pertains to handling bilge slops?

 
 
 
 

4. In accordance with the international MARPOL Annex I regulations and the federal regulations in 33CFR Subchapter O, specific machinery space operations onboard all ships of 400 gross tons or above other than a tanker must be documented in an Oil Record Book. Which of the listed machinery space operations must be documented in the Oil Record Book?

 
 
 
 

5. Under the international MARPOL regulations under Annex IV, if the ship is more than 3, but less than 12 nautical miles from the nearest land, what statement is true?

 
 
 
 

6. In accordance with international MARPOL Annex V regulations and federal regulations under 33CFR Subchapter O, the discharge of what category of garbage is prohibited in any waters?

 
 
 
 

7. In accordance with international MARPOL Annex V regulations and federal regulations under 33CFR Subchapter O, the prohibition of the discharge of dunnage, lining, and packing materials that float applies to a vessel operating within how many nautical miles of the nearest land?

 
 
 
 

8. In accordance with international MARPOL Annex V regulations and federal regulations under 33CFR Subchapter O, the prohibition of the discharge of ground paper products, rags, glass, metal, bottles, and crockery applies to a vessel operating within how many nautical miles of the nearest land?

 
 
 
 

9. In accordance with international MARPOL Annex V regulations and federal regulations under 33CFR Subchapter O, the discharge of plastics into the sea or the navigable waters of the United States is strictly prohibited. Which of following statements is true concerning the legal disposal of plastics?

 
 
 
 

10. In accordance with international MARPOL Annex V regulations and federal regulations under 33CFR Subchapter O, the discharge or disposal of garbage on vessels of 400 gross tons and above engaged in commerce requires recordkeeping. Which of the following discharge or disposal operations requires a detailed description of the contents of the garbage?

 
 
 
 

11. Which of the following fire extinguishing agents which may be found aboard ship is designated as an ozone-depleting substance as defined in the Montreal Protocol on Substances that Deplete the Ozone Layer and is controlled as a result?

 
 
 
 

12. In accordance with the international MARPOL Annex VI regulations, the nitrous oxide (NOx) emissions associated with certain diesel engines are required to operate under certain acceptable limits. To which of the listed engine applications would the NOx emission regulations apply?

 
 
 
 

13. In accordance with the international MARPOL Annex VI regulations, in the absence of an exhaust gas cleaning system, what is the maximum allowable sulphur content for a fuel to be burned while the ship is operating in an emissions control area?

 
 
 
 

14. In accordance with the international MARPOL Annex VI regulations, which of the listed substances is prohibited from being burned in a shipboard incinerator?

 
 
 
 

15. In accordance with the international MARPOL AnnexVI regulations, what is the minimum allowable flue gas outlet temperature for a continuous-fed shipboard incinerator while in operation

 
 
 
 

16. Your ship's Second Engineer falls while working in the engine room in port and is taken to the hospital and found unfit for duty. As Chief Engineer you inform the USCG of the accident. The Coast Guard officer you talk with asks if you have the correct complement of crew to proceed to your next port. How would you determine if the ship has the correct number of persons with the corresponding ratings required to proceed to the next port?

 
 
 
 

17. You are the Chief Engineer of a vessel of more than 1600 gross tons on an international voyage. During in port cargo operations, you find that the security seal on the emergency generator room has been broken. As the senior Engine officer onboard, how would you react?

 
 
 
 

18. When looking for IMO regulations on vessel watertight integrity, the information will be found in which of the following documents?

 
 
 
 

19. When looking for IMO regulations on a vessel's oil water separator, the information will be found in which of the following documents?

 
 
 
 

20. International regulations governing emergency power and lighting would be found in which of the following documents?

 
 
 
 

21. During a vessel conversion it is necessary to check regulations pertaining to the fire protection equipment. Which of the following international documents would contain the information?

 
 
 
 

22. On a vibration analysis report, acceleration is best described as which of the following?

 
 
 
 

23. Resonant vibrations, which can cause machinery failure, occur when which of the following conditions happen?

 
 
 
 

24. When reviewing results of vibration analysis, vibration at a bearing occurs at the same frequency as the motor rpm, with a displacement in the radial direction that is twice that of the axial direction. Which of the following could this indicate?

 
 
 
 

25. While examining results of vibration analysis of a rotating piece of machinery, you find very high amplitude/displacement readings at a very high frequency at one measuring point. What would that indicate?

 
 
 
 

26. With a machinery lubricating oil analysis program, it is important to monitor trends over time. What would be indicated by a sudden increase in metallic content of a recent sample of used diesel engine crankcase lubricating oil?

 
 
 
 

27. With a machinery lubricating oil analysis program, it is important to monitor trends over time. What would be indicated by elevated copper levels associated with a recent sample of used diesel engine crankcase lubricating oil?

 
 
 
 

28. Elevated metal levels present in a recent sample of used diesel engine crankcase lubricating oil is indicative of a condition. What would high silicon levels indicate?

 
 
 
 

29. What used diesel engine crankcase lubricating oil analysis test result would indicate the oil's ability to neutralize harmful acidic byproducts?

 
 
 
 

30. Elevated metal levels present in a recent sample of used diesel engine crankcase lubricating oil is indicative of a condition. What would high iron levels indicate?

 
 
 
 

31. Which of the following fuel sampling methods would present the most reliable, accurate, and cost-effective option for shipboard use?

 
 
 
 

32. Fuel density is easily checked on board ship to facilitate proper fuel treatment. What is the maximum fuel density at 15oC allowed for proper centrifugation to take place?

 
 
 
 

33. The water content of fuel is easily checked on board ship to insure that serious problems do not result. What is the maximum water content of fuel that can be tolerated without serious problems resulting?

 
 
 
 

34. Various tests while conducting a fuel oil analysis can be performed on board to facilitate proper fuel storage, handling, and treatment. What tests are most important for determining what temperatures to maintain throughout the fuel forwarding and service systems?

 
 
 
 

35. Various tests while conducting a fuel oil analysis can be performed on board to facilitate proper centrifugation. What test provides the key data for selecting the correct purifier gravity disk for fuel oil centrifugal purifiers?

 
 
 
 

36. Compatibility of fuel is easily checked on board ship to insure that serious problems do not result. What statement concerning fuel incompatibility is true?

 
 
 
 

37. Which of the following comprehensive computerized maintenance system database modules would contain data used for budget tracking?

 
 
 
 

38. Which of the following comprehensive computerized maintenance system database modules would contain data such as part numbers and part stowage locations?

 
 
 
 

39. Which of the following comprehensive computerized maintenance system database modules would contain technical data such as machinery serial numbers?

 
 
 
 

40. Which of the following comprehensive computerized maintenance system database modules would contain data related to purchase orders for parts or repair services from outside vendors?

 
 
 
 

41. Which of the following comprehensive computerized maintenance system database modules would be used to generate a report tracking consumable supplies consumption?

 
 
 
 

42. What type of maintenance system would be associated with a vibration monitoring analysis system?

 
 
 
 

43. What type of maintenance system would be associated with a comprehensive lubricating oil analysis program?

 
 
 
 

44. What type of maintenance system would be associated with manufacturer recommendations as a function of machinery running hours?

 
 
 
 

45. What type of maintenance system would be associated with accomplishing maintenance after a machinery breakdown?

 
 
 
 

46. When used together to maximize plant reliability, which of the following maintenance management schemes would be the primary tool in a integrated maintenance management system?

 
 
 
 

47. As a result of a load or set point change, in addition to minimizing the maximum value of the error, what are the two additional objectives of a closed-loop control system?

 
 
 
 

48. What process control system control mode is most likely to have steady-state error (also known as offset or residual error)?

 
 
 
 

49. For a process control system using the proportional control mode, what statement is true

 
 
 
 

50. Suppose a temperature transmitter has an input range from 0 to 100 degrees Celsius and an output range of 4 to 20 milliamps. Assuming that the transmitter has a linear response pattern, what is the output current in milliamps if the input temperature is 40 degrees Celsius?

 
 
 
 

51. In a closed-loop process control system, what is meant by the proportional mode of control?

 
 
 
 

52. In a closed-loop process control system, what term is used to describe the progressive reduction or suppression of oscillation in a component?

 
 
 
 

53. The size of ball and roller bearings can be identified by the __________.

 
 
 
 

54. Which bearing will carry the load on two small points diametrically opposite to each other?

 
 
 
 

55. Which of the following statements describes the characteristics of precision manufactured roller bearings?

 
 
 
 

56. . Which of the listed types of bearings is an example of a half bearing

 
 
 
 

57. The thickest deposit of scale in a flash evaporator is most likely to occur in the tubes of the __________.

 
 
 
 

58. A bearing using an oiling ring as a means of static oil feed must occasionally be serviced by removing the wear particles, grit, and moisture. How is this accomplished?

 
 
 
 

59. When tuning a Proportional, Integral, Derivative (PID) controller/loop, one should know/understand the influence of each action component on the loop. Which description of a component is correct?

 
 
 
 

60. Who on board is responsible for identifying all new crew members and insuring that the safety training and shipboard familiarization training program is implemented according to written policy and procedures?

 
 
 
 

61. As a first assistant or chief engineer, what is the source of your authority?

 
 
 
 

62. It has been demonstrated that delegation can enhance employee development. To avoid a fear of failure, what must a manager avoid when delegating decision-making power to an employee?

 
 
 
 

63. To maximize the profitability of a shipping company, in goal-setting ships are often asked to increase productivity. Which of the following scenarios represents an actual decrease in productivity?

 
 
 
 

64. Which of the following diagrams or charts is particularly useful for understanding and identifying the causes of problems?

 
 
 
 

65. As an engineering department manager in dealing with a grievance presented by a unlicensed engine department crew and union member, what documentation spells out the grievance procedure?

 
 
 
 

66. What is usually the last step in trying to resolve a grievance filed by a crew member as established by the collective bargaining agreement between the company and the crew member's union?

 
 
 
 

67. You are the Chief Engineer onboard a general cargo vessel in excess of 1600 gross tons. To remain in compliance with the 33 CFR Oil Record Book requirements for non-tank vessel machinery space operations, which of the following operations requires an entry to be made in the Oil Record Book?

 
 
 
 

68. In accordance with the international MARPOL AnnexVI regulations, what is the minimum allowable flue gas outlet temperature for a continuous-fed shipboard incinerator while in operation?

 
 
 
 

69. When measuring vibration, an engineer should be concerned with recording the velocity or displacement of the measurement. Which other factor should also be of concern?

 
 
 
 

70. A simple precaution to reduce the possibility of accidental fires in the paint locker, is to __________.

 
 
 
 

71. Good housekeeping on a vessel prevents fires by __________.

 
 
 
 

72. The most likely location for a liquid cargo fire to occur on a tanker would be __________.

 
 
 
 

73. In accordance with 46 CFR Part 109, the Muster List ("Station Bill") shows each crew lifeboat station, their duties during abandonment, basic instructions, and __________.

 
 
 
 

74. In a typical automatic fire alarm system, all zone circuits are always connected __________.

 
 
 
 

75. Fire detecting systems on merchant vessels may be arranged to sense __________.

 
 
 
 

76. What safety information can be found in the fire control plan that is posted or available in booklet form on your ship?

 
 
 
 

77. According to Coast Guard Regulations (46 CFR), the fuel tanks of motor-propelled lifeboats shall be __________.

 
 
 
 

78. The device used for preventing the passage of flames into enclosed spaces is called a __________.

 
 
 
 

79. Coast Guard Regulations (46 CFR) require that lifejackets shall be __________.

 
 
 
 

80. In addition to the lifejackets stowed in places that are readily accessible, lifejackets must also be stowed at______________.

 
 
 
 

81. Which statement is TRUE concerning life jackets which are severely damaged?

 
 
 
 

82. Under the federal regulations of 33CFR Subchapter O, what is the definition of a

 
 
 
 

83. Prior to getting underway on the navigable waters of the United States your vessel must conduct tests according to 33 CFR regulations for ports and waterways safety that test equipment necessary for vessel propulsion, maneuvering, emergency power, communications, alarms, and control. Within how many hours of getting underway must these tests be performed?

 
 
 
 

84. Prior to entering the navigable waters of the United States after an international voyage, your vessel must conduct drills according to 33 CFR regulations for ports and waterways safety that test steering system functionality and log that in the vessel logbook, unless the drill is conducted and logged on a regular basis at least once every three months. Within how many hours of arrival must these drills be performed?

 
 
 
 


Total Rating:


click here to go to review now